Tectus 3D Hinge Template - Select Hinge Size
Tectus 3D Hinge Template - Select Hinge Size
✔ Made in the USA | Lifetime Guarantee
Couldn't load pickup availability
Our two-step Tectus Hinge Template is the fastest, easiest and most accurate way to rout the two-step mortises required for invisible hinges. Made of 1/2" phenolic for heavy duty use. Includes a Double Track for mounting the jig and clamping to your work. Clamps not included. Optional 4512 Flip Stop mounts on an optional Double Track for quicker part indexing. Optional longer Double Tracks (up to 94" - 4094) available to mount multiple two-step Hinge Jigs and Flip Stops. Optional 6507 Self-Centering Drill centers itself in the invisible hinge screw mounting hole for a perfectly centered 7/64" pilot hole.
Model Comparison
| Model | Hinge | Mortise Size | Jig Size | Included Track | Required Bit |
|---|---|---|---|---|---|
| 8652 | Tectus 340 3D | 28mm wide × 131mm long | 5-5/8" × 7-3/4" | 8" Double Track | 1/2" spiral, 1-1/2" cut (15409) |
| 8653 | Tectus 540 3D | 32mm wide × 200mm long | 5-5/8" × 11-5/8" | 12" Double Track | 1/2" spiral, 2" cut (15410) |
| 8654 | Tectus 640 3D | 32mm wide × 240mm long | 7-5/8" × 15-5/8" | 16" Double Track | 1/2" spiral, 2" cut (15410) |
- All models require a 3/4" OD Bushing & Locknut (5032K or equivalent, sold separately)
- If using your own bushing, make sure the nose isn't over 3/8" long
- Hinge setback is built-in according to the manufacturer's specs
- Jig clamps to the work (no nail holes); both the long/shallow and short/deep mortises are cut without moving the jig or part
- Has two retractable stops for the short/deep mortise
📎 Product Documentation
Our products are made in the USA and include a Lifetime Guarantee against defects in material or workmanship. For product questions or a quote for shipping outside the continental US contact us by Phone 800-344-6657, Email Info@Woodhaven.com or Chat.
I don’t usually write a review but this time I wanted to share my thoughts because I think this is a great product it can be improved, the offset on the fence is way to close to the edge leaving barely 3mm of material on the edge leaving that part of the door too fragile also the deep mortise is too close to the radius of the shallow mortise leaving barely enough material for the screws.
